Tylo SENSE ELITE Notice D'installation page 16

14
Figure 15: Installing the sensor
Figure 16: Wiring through the wall.
Unusual voltages/numbers of phases
Contact Tylö Customer Service before connecting to voltages or
numbers of phases that are not listed in the wiring diagram Figure
17.
External ON/OFF switch (option)
The external ON/OFF switch can be positioned anywhere outside
the sauna, but not too far from the heater, to avoid voltage loss in
the cable. Voltage loss aff ects the LED indicator for heater status
(if built-in and connected to the switch).
For further information, see instructions supplied with the control
panel.
Door contact (option)
The door contact is necessary to be able to use the Elite panel's
calendar function, plus remote control the sauna via external
switch, mobile or PC apps.
See the instructions supplied with the control panel.