Sound Pad Button Overview; Assigning Sounds To Sound Pad Buttons - Tascam Mixcast 4 Mode D'emploi

SOUND PAD button overview

Effect sounds, background music and other audio can be assigned to the
pads on top of the unit.
Press the PAD buttons to play the sounds assigned to them.
Groups of sound source settings for PAD buttons (1–8) are called banks.
This unit can switch between 9 banks (0–8), allowing up to 8 different
sounds to be assigned to each pad.
Bank zero is preset with the sound sources included in the unit.
NOTE
The sound sources included in the unit cannot be changed.
See the Reference Manual for details about SOUND PAD button opera-
tion.

Assigning sounds to SOUND PAD buttons

TASCAM Podcast Editor (hereafter "Podcast Editor") must be used to as-
sign sounds to pads. (See TASCAM Podcast Editor overview page 16.)
In this document, we explain how to assign Podcast Editor default effect
sounds to pads. See the Podcast Editor manual for procedures to make
settings for other sounds.
1. Launch the Podcast Editor app that has been installed on a smart-
phone, tablet or computer.
2. Click "New Project".
3. Input the name of the project in the "Project Name" field.
4. Click "Project Location" and select the location where the project
will be saved.
5.
Click "Create".
This opens the Podcast Editor Home Screen.
6.
Click the PAD ( ) icon on the Podcast Editor Home Screen to open
the Sound Pad Screen.
Podcast Editor Home Screen
7. Click "Default Sounds" on the Sound Pad Screen.
Pad Sounds Screen
NOTE
The Podcast Editor default effect sounds are assigned to the Bank 1
PAD buttons (1–8).
After completing the assignments, the names of the files assigned to
each pad will appear on the buttons in the SOUND PAD section of the
Home Screen.
Appearance with default effect sounds assigned
17
TASCAM Mixcast 4