Güde GSE 2501 Traduction Du Mode D'emploi D'origine page 20

•
Replace the lid on the filler.
Ignition Plug
• Remove the ignition cable from the ignition plug (14) .
•
Remove the plug using a plug wrench.
• Clean the electrode with a wire brush.
•
Check the electrodes distance (0,7 - 0,8 mm correctly ) and adjust if necessary
•
Put the place back in the place.
Oil Replacement
• Let the engine heat up.
• Unscrew the filler plug.
• Remove the discharge screw and drain the used oil onto a suitable container. .
• Check packing and replace it if necessary. Screw the discharge screw in a pour new oil in. (For the kind of oil see
Chapter 4).
• Screw the filler neck on.
Noise Silence Check
•
Let the noise silencer cool down.
•
The silencer could be clogged with parts of the filter.
•
Unscrew the lid and remove the cover.
•
Clean the surface with a wire brush.
• Replace if necessary.
Inspections and Maintenance Safety Instructions
The unit will serve as a sufficient aid only if maintained and cared for appropriately. Insufficient maintenance and care may result in
accidents and injuries.
Inspections and Maintenance Schedule
Time interval Description
Every 3 months •
Before each use •
After 1 month and after 6
•
months
Every 3 months/50 hours
•
of operation
•
Every 6 months
Every 12 months •
Before each use •
Before each use
•
Before each use •
Before each use •
Every 12 months •
Before each use •
Every 6 months •
Check the ignition plug condition, adjust distance and clean it
Check the engine oil level
Replace engine oil
Clean the air filter or replace it if necessary
Clean the petrol cock and filter, replace if necessary
Check the valves distance, adjust if necessary .
Check the petrol hose for cracks and other damages, replace if necessary .
Check the exhaust system for holes, pack or replace as necessary
Check the noise silencer, clean or replace as necessary
Check the correct function of the choke
Check the cooling fan
Check the Bowden starting cable, replace if necessary
Check screws and connecting elements and replace if necessary e
20
Fig. 10
Other details if
necessary
With the engine
cooled down