Télécharger Imprimer la page

Güde GSE 2501 Traduction Du Mode D'emploi D'origine page 18

Masquer les pouces Voir aussi pour GSE 2501:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Immediately switch the generator off under conditions as follows:
- unsteady or uneven engine run
- electrical output decline
- connected appliance overheating
- excessive generator vibrations
- sparkling
- smoke or fire
Make sure that there is enough fuel before connecting the generator to the appliance
Never refuel while the unit is running. Before refuelling, let the unit cool down for 54 minutes as a minimum after any
use.
Never touch the unit hot parts.
Do not store fuel near the unit.
The silencer and the air filter work as flame trap. Make sure that the parts are installed correctly and in perfect
condition.
Operation
Use of Generator „Turning On"
Fig. 6
Generator Turning Off
Fig. 7
Open the petrol cock by turning (ON).
Put the choke in the starting position (see sign on the
air filter).
Pull the starting cable slowly until resistance is felt,
then make a strong pull to start the engine.
When the engine gets heated up, push the choke in
the initial position and wait for the indicator to light up.
Connect the appliance cable
If the output is overloaded, the overloading fuse will trip. The
indicator lights on.
The generator will switch off automatically at short circuit.
Make sure that NO appliance is connected.
Put the on/off switch in OFF position.
Turn the fuel cock to OFF.
18

Publicité

loading

Ce manuel est également adapté pour:

Gse 2700Gse 4700Gse 1200 4t406234062840631 ... Afficher tout