Trouble Shooting - Springlane Mila Mode D'emploi

5. After loosening the blade, carefully
remove it by turning it and insert the
new blade.
6. Carefully tighten the new blade by

Trouble shooting

Mila indicates problems using a signal beep and via the display.
E01
1. There is no glass jar.
2. The water container is empty.
3. The lid is open or not properly closed.
If the device does not work properly, please check the following steps:
1. Check if the manual was followed precisely and correctly.
2. Check the following table for possible reasons.
3. Check if all fuses are working.
Problem
There is water underneath
the device.
The mixing chamber/bla-
des are not clean after the
automatic self-cleaning
programme.
E02
4. The collection container must be
Make sure that the water and collection containers are
closed and that the collection container has not spilled
over.
Add a drop of detergent and select the intensive clea-
ning mode.
Gently wipe off by hand with a damp cloth.
hand. Start a manual cleaning program-
me using the "Cleaning" button. The
blade fastens itself during the first uses.
E03
emptied.
Solution
E04
29