Springlane Mila Mode D'emploi page 30

The beverage tastes sandy.
The mixing result is chunky.
Error codes
Error
code
The motor is overloaded due to too many
E 05
ingredients.
The temperature sensores are sticky or there are
E 06
too many ingredients.
E 07
The voltage is lower than 160 V or exceeds 260 V.
E 08
Signal defect.
E 09
E 10 The discharge hose is jammed.
E 11
The temperature sensor is defective or damaged.
E 12
E 13 The pass-through sensor is defective or damaged.
E 14 Electrical fault.
The heating unit of the mixing chamber is
E 15
defective or damaged.
Should your Mila show any other defects, please contact a professional repair service
provider. Do not attempt to repair the appliance yourself.
30
Reduce the quantity of ingredients used to prepare your
drink.
Soak the ingredients before processing.
Soak the ingredients and/or chop them before preparation.
Filter out any chunks using a sieve.
Replace the blades.
Problem Solution
Reduce the amount
of ingredients and
clean the machine.
Reduce the amount
of ingredients and
clean the sensors
inside of the mixing
chamber.
Please contact
customer services.
Please clean.
Please contact
customer services.