Springlane Mila Mode D'emploi page 24

Preparing a drink
1. Connect the appliance to the power
supply.
2. Switch on Mila by tapping at the
bottom centre of the display. The
display now lights up.
2a
2b
3. You can select the various programmes
using the "Program" button. Just push
the button several times.
4. Press the "Capacity" button multiple
times to select the quantity. You can
prepare 300 ml, 500 ml, 800 ml, or
1,000 ml in the large Mila.
Mila Mini is suitable for the prepa-
24
ration of 300 ml or 600 ml. Mila
processes large quantities in two runs.
Nevertheless, all ingredients are to be
poured into the mixing chamber at the
beginning.
5. Fill the water container with filtered
water.
6. Pour all ingredients into the mixing
chamber.
7. Press the "Start/Stop" button to start
the programme.
8. Press the "Start/Stop" button again
during the first minute to stop the
programme.
9. Mila pours your drink into the glass
jar. Warning: The drink and glass jar
are very hot. Only hold the glass jar
by the handle. At the end of pre-
paration, you will hear a beep sound
as the self-cleaning mode starts.
The display will show the following
message "Self-clean". Mila pours out
the cleaning water into the collection
container. Mila beeps again when the
self-cleaning mode is completed.