Cleaning And Care - Springlane Mila Mode D'emploi

Masquer les pouces Voir aussi pour Mila:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
completed after 8 hours.
3. Select the programme. For safety
reasons, the "Soaked Soy" and "Juice"
programme are not included.
4. Fill in the ingredients and press
"Start/Stop".
5. You can stop the programme and delay
time by pressing the "Start/Stop" but-
ton again during the first minute. Now
you can make a new selection.

Cleaning and care

Cleaning
Mila comes with one automatic and two
manual self-cleaning modes. This makes
cleaning a breeze.
1. After every programme, Mila auto-
matically switches on the self-cleaning
mode. The cleaning takes 7 minutes.
Mila only needs water to clean herself.
After the end of the self-cleaning pro-
cess, open the lid to allow the mixing
chamber to dry.
2. You can also directly select the clea-
ning mode via the display, for example
after not using the device for a longer
period of time, after preparing a sweet
drink (with sugar, syrup, or fruit), or
whenever the appliance is due for a
basic cleaning:
• Select the cleaning mode and
26
Warning: If the room
temperature exceeds
30°C, do not set the timer at over
12 hours to prevent germs.
press "Start" to start the clea-
ning mode. It takes 3 minutes.
After the end of the self-cleaning
process, open the lid to allow the
mixing chamber to dry.
• Press the Cleaning button again
to select the intensive cleaning
mode. This programme takes
8 minutes. It is recommended
to run the intensive cleaning
programme regularly, even if the
appliance is in constant use. Add
a drop of mild detergent into
the mixing chamber before the
programme starts. On first use,
make sure that the detergent
is not too highly concentrated
to prevent excessive foam from

Publicité

Table des Matières
loading

Table des Matières