Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. When the process is complete
the indicator light goes out and
the sachet can be removed. For
The individually cut vacuum foil sachet can now be used to vacuum ingredients.
CABLE SPOOL
Beneath the device a cable spool is placed for storing of the connection cable.
REPLACEMENT SACHETS
Vacuum foil sachets with a one-sided nobs structure can be used. This nobs
structure enables an optimal vacuuming process. The width may not be over
30 cm.
CLEANING AND MAINTENANCE
The vacuum sealer should be cleaned after each use and dried as descri-
bed. Insufficient and improper maintenance of the device may diminish the
device's functionality.
•
Unplug the device before each cleaning.
•
Because of electrical security reasons the device may not be cleaned
with liquids or even immersed in those.
•
If required, wipe the casing with a slightly moistened towel.
•
If residues have formed on the welding wire or the silicon lip, let the
device cool down and carefully remove the residues.
22
removing the sachet, press the
release buttons and open the lid.
Publicité
Table des Matières
