Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
7. Press the "set" button again to select
the temperature. You can set the
temperature in 5 °C increments, from
35 to 70 °C, via the rotary switch.
8. Press the "start/stop" button to
confirm your selection and start the
drying process. The flashing heating
symbol indicates that Dora is heating
up. You will know the operating
temperature has been reached when
the heating symbol stops flashing.
9. Depending on the type of ingredient
and the duration of preparation, rotate
the trays regularly from top to bottom
during preparation in order to obtain a
consistent result across all ingredients.
Find many tips for different ingredients
and recipes in the recipe booklet.
Adjusting the height of the drying
trays
The trays are height­adjustable, so

Cleaning and care

Dora and the trays should be cleaned and
dried after each use as follows. Lack of or
improper care of the appliance can impair
the functionality of the appliance.
• The drying trays, the cereal bar moulds
and the tongs can be cleaned in the
18
that you can easily dry flat and higher
ingredients in your Dora. The trays have
a special plug­in system: Turn them
horizontally by 180° to change the height
setting while they are mounted on another
tray.
You will know the lower setting has been
reached when you hear the connectors
snap together.
When the connectors are perpendicular to
each other, you will know that the spacing
has increased.
dishwasher. Place the shelves as
upright as possible. If the shelves have
warped slightly, don't worry, you can
still stack and use them as normal.
• Clean Dora (and the lid) with a damp
cloth and a small amount of detergent.
Once clean, dry both parts carefully.

Publicité

Table des Matières
loading

Table des Matières