Christopeit Sport CX 6 Notice De Montage Et D'utilisation page 25

Step 6:
Installation of the fixed handgrip (48) and computer (55) at handlebar
post (19).
1. Put the plug of the connection cable (18) into the socket at the backside
of the computer (55).
2. Place the computer (55) onto the plate at the upper end of the handlebar
post (19) and tighten firmly with screws (57). (Note: When pushing on the
computer onto handlebar post (19) take care that the cables cannot be
trapped.)
3. Put the plug of the pulse connection cable (50) into the socket at the
backside of the computer (55) and connect with pulse cables (46).
4. Place the fixed handgrip (48) with lower borings onto the threat of handle
bar post (19) in and tighten it with fixing plate (51), washers (39) and self-
lock nut (22) firmly. (Note: The position of fixed handgrip should have
inclination away from the handlebar post (19).)
5. Put the front and back handlebar cover (53a+53b) onto the upper end
of handlebar post (19) together and fix them with screws (11+26). Hide
the pulse cables as most as possible into handle bar cover (53) and use
cable save (47) to lead the cables.
Step 7:
Attach the AC adapter (56).
1. Please insert the plug of adaptor (56) to the jack (63) of chain guard.
2. Please insert the adaptor (56) to the jack of wall power (230V~50Hz).
Step 8:
Checks
1. Check the orderly installation and function of all bolted and plug con-
nections. Installation is then complete.
2. When everything is in order, familiarise yourself with the machine at a light
resistance setting and make the individual adjustments of the footrests
(31L+31R).
Note: Please keep the tool set, the puller and the instructions carefully
because these may be required later for repairs or spare parts orders.
If you ever remove the covers (58L+58R), observe that these are attached
not only outwardly with the screws (11+61), but also inwardly at the rear
end of the cover with the screws (61).
25