Peg-Perego VIAGGIO 1 DUO FIX K Notice D'emploi page 29

the car seat, press the lever underneath (fig. a) and pull it
towards you into the required position (fig. b).
• To release the Viaggio1 Duo-Fix K car seat from the Isofix Base
0+1, press the same lever in the same way (See Point 10).
How to remove the lining
To remove the lining of the Viaggio1 Duo-Fix K car seat:
• slip the booster cushion off if there is one (point 21);
• unfasten the safety harness (point14);
26 unfasten the straps from the back attachment point;
27 release, from the back, the safety harness straps and pull
them away from the front;
28 release, from the back, the shoulder pads and pull them
away from the safety harness from the front;
29 Slip off the adjuster strap (fig. a) and then remove the
headrest from above (fig. b).
30 unfasten, from underneath the frame, the buckle of the leg
divider strap (fig. a) and extract the strap from the pad of
the leg divider (fig. b);
31 pull the lining upwards to remove it, checking that the
strap goes through the opening.
Maintenance of the padding
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
How to replace the lining on the
Viaggio1 Duo-Fix K car seat
To replace the lining of the Viaggio1 Duo-Fix K car seat:
32 insert the safety harness from underneath the frame and
thread them through the openings at the base of the seat.
Insert the strap in the lining of the leg divider;
33 attach it to the opening in the frame
34 attach the strip to the attachment point of the leg divider strap
35 thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
36 Thread the head rest – make sure the red strip is passed
through the opening in the fabric.
• Thread the shoulder straps in the safety harness.
37 Insert the safety straps in the seat in this order: begin with the
buckle of the shoulder straps and then deal with the straps.
38 extend the straps and insert them in the seat's frame (the
straps in the upper hole, the buckle in the lower one).
39 fasten them properly in the back, as shown in the picture.
• fasten the safety harness straps (point 17)
IMPORTANT: the straps must not be twisted around.
40 ATTENTION: The central adjustment strap must pass
between the body and the plastic shield, as shown.
41 fasten them to the back attachment point, threading them
behind the instructions tray.
• apply the booster seat if the baby is still small.
Accessories
42 Clima Cover Car Seat: washable cover in Tencel, a natural
heat-regulating fiber that regulates body moisture (warm
in winter and cool in summer) (Fig. A).
• Travel Bag Car Seat: practical travel bag that keeps the
car seat clean and protected (Fig. B).
43 Car Seat Cup Holder: practical and removable cup holder,
to keep baby's drink to hand (Fig. C).
Serial numbers
44 The name of the product, production date and serial number
of the Viaggio1 Duo-Fix K can be found under the seat.
45 The approval label of the Viaggio1 Duo-Fix K is behind the
backrest.
46 Production date of the strap.
This information is required for any complaints.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate them
with light oil.
29