Connecting The Optional Ac Adapter - Star TSP Série Mode D'emploi

3-3. Connecting the Optional AC Adapter

Note: Before connecting/disconnecting the AC adapter, make sure that
power to the printer and all the devices connected to the printer is
turned off. Also make sure the power cable plug is disconnected from
the AC outlet.
(1) Connect the AC adapter to the power cable.
Note: Use only the standard AC adapter and power cable.
(2) Connect AC adapter to the connector on the printer.
(3) Insert the power cable plug into an AC outlet.
Important!
When disconnecting the power cable, take hold of
the cable connector to pull it out. Releasing the lock
makes it easy to disconnect the connector.
Pulling the power cable excessively could cause
damage to the connector.
– 9 –