Star TSP Série Mode D'emploi page 18

Paper roll holder
Tear Bar Model
Note: When using a paper roll with an
57.5 mm width, install the optional
paper roll holder in the groove in the
printer.
3) Push down both sides of the printer
cover to close.
Note: Make sure that the printer cover
is securely closed.
4) Tear Bar Model:
Tear off the paper as shown.
Auto Cutter Model:
If the printer cover is closed after
turning on the power, the cutter op-
erates automatically and the front
end of the paper is cut.
– 15 –