Connecting The Optional Ac Adapter - Star TSP552 Mode D'emploi

4-3. Connecting the optional AC Adapter

Note: Before connecting/disconnecting the AC adapter, make sure that
power to the printer and all the devices connected to the printer is
turned off. Also make sure the power cable plug is disconnected from
the AC outlet.
(1) Connect the AC adapter to the power cable.
Note: Use only the standard AC adapter and power cable.
(2) Cut off the blank cable hole on the printer cover using nippers.
(3) Pass the AC adapter through the hole, and connect it to the connector on the
printer.
Note: Make sure that the AC cable is passed through the hole. Failure to do
so may cause the cable to be squashed by the printer, resulting in
serious danger.
(4) Insert the power cable plug into an AC outlet.
– 7 –