Selecting The Operation Mode; Detection Mode - SORHEA MIRIS 3000 Notice D'installation

SORHEA
8

SELECTING THE OPERATION MODE

8.1

Detection mode

Detection mode is configured on the "Master" Control Unit:
 To activate dual-beam detection, set switch 5 of the "Master" Control Unit to ON.
 To activate mono-beam detection, set switch 5 of the "Master" Control Unit to OFF.
Dual-beam detection mode
"Master" Control Unit setting
ON
5
(ON)
- 48 -
Mono-beam detection mode
"Master" Control Unit setting
MIRIS 3000 / 3100
ON
5
(OFF)