SORHEA MIRIS 3000 Notice D'installation page 36

SORHEA
 Detail for pole-mounted columns
Seal the 4 anchor rods in solid concrete, taking care to install them in a vertical position using the
provided sealing template.

Position the floor socket seal so that it is oriented the same way as the beam.

Pay attention to the position of the cable's entrance.

The fixing model holding the base assembly in place also serves as the sealing template.
=
200 mm / 7.9 in
250 mm / 9.8 in
 Pole-mounted columns
1. Place the screws M5x30 in frame grooves.
2. Place the spacers at the back of the column, then fasten the assembly on the pole.
4 anchors rods
M16x250
Cable entry
Hole 70 mm
/ 2.7
=
Effective zone of
beams:  90°
- 35 -
MIRIS 3000 / 3100