SORHEA MIRIS 3000 Notice D'installation page 35

SORHEA
 Reinstallation oh the infrared cover
1. Attach the cover on the curved top of the housing so that the cover can open the column, and
is inserted in the grooves of the housing. (be careful not to change the orientation of the cells)
2. Slide the cover upward, keeping it at the same level as the curved top.
3. Close the cover gradually on the frame, making sure that it snaps securely into the top and
bottom of the flange.
4. Then fasten the screw(s) of the cover.
1
3
 Detail for wall-mounted columns
Wood screws 4,5x60
2
1
70
Spacers
1
 Remove the plugs sealing the mounting
holes
 Install the spacers at the rear of the frame by
aligning them with the mounting holes.
The spacers remaining must be mounted in
pairs equidistant from the first ones.
 Attach the column to the wall.
 Pass the cabling through the bottom of the
column.
- 34 -
MIRIS 3000 / 3100