Mono-Beam On Bottom Cell (Optional) - SORHEA MIRIS 3000 Notice D'installation

SORHEA MIRIS 3000 / 3100
8.2

Mono-beam on bottom cell (optional)

The column needs to be set to dual-beam in order to activate the mono-beam on the bottom cell.
Mono-beam on the bottom cell triggers an intrusion alarm when the bottom cell beam is cut for 1.5
seconds.
Mono-beam at the bottom cell is activated on the "Slave" Control Unit in position 1 only.
 To activate mono-beam on the bottom cell, set switch 5 of the "Slave" Control Unit 1 to OFF.
 To deactivate mono-beam on the bottom cell, set switch 5 of the "Slave" Control Unit 1 to ON.
Mono-beam detection on the Mono-beam detection on the
bottom cell activated bottom cell deactivated
"Slave" Control Unit 1 setting "Slave" Control Unit 1 setting
ON ON
5 5
(OFF) (ON)
- 49 -