Installation Of Miris 3100 Column - SORHEA MIRIS 3000 Notice D'installation

SORHEA
4.2

Installation of MIRIS 3100 column

 Wall mounting: see notice provided with brackets
 Detail for floor socket
Seal the 4 anchor rods in solid concrete, taking carte to install them in a vertical position using the
provided sealing template.

Position the floor socket seal so that it is oriented the same way as the beams.

The fixing model holding the base assembly in place also serves as the sealing
template.
250 mm / 9.8 in
200 mm / 7.9 in
 Mounting the column on the floor socket
4 anchors rods
M16x250
Oblong: 50x130 mm
125 mm
/ 4.9 in
1
Slide the braces
onto the floor
socket without
fastening them.
Effective zone of
beams:  90°
/ 2x5.1 in
- 36 -
MIRIS 3000 / 3100
Slide the column between
the two floor socket
2
mounts. Be careful to
leave space between the
bottom of the column and
the floor socket for the
cables.
Tighten the fastening
screws for the braces to
keep the column stable.