Chicco Isofix Base Mode D'emploi page 16

Removing the base
Press the adjuster lever (L) on the sup-
port leg and shorten it all the way to
the end.
Release the car safety belt and free the
abdominal belt from the blue slot.
3) The base can now be removed from
the vehicle seat.
CLEANING AND
MAINTENANCE
How to Clean the Plastic or Metal
Parts
Clean the plastic and coated metal parts
with a damp cloth only. Never use abra-
sive detergents or solvents.
Checking the condition of the
components
Check on a regular basis that the plastic
parts are not worn out and there are not
signs of damage or fading.
WARNING! If the child car seat is de-
formed or worn out, it must be replaced:
it may no longer comply with the original
safety standards.
Storing the Product
When it is not fitted in the car, it is rec-
ommended to store the child car seat in
a dry place, away from sources of heat
and protected from dust, humidity and
direct sunlight.
Disposing of the product
When the child car seat no longer com-
plies with the original safety standards,
stop using it and dispose of it at an ap-
propriate collection point. Dispose of
the product as laid down in the envi-
ronmental regulations in force in the
Country of use.
16