Receiving Measurements Automatically; Technical Data - Bresser ClimaTemp FSX Guide Rapide

12 Receiving measurements
automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings for indoors. Readings from
the outdoor sensor will be displayed within 3 minutes after
powering it on.
If no signal is received, proceed as follows:
Press 12/24 button for approx. 3 seconds to initate recep-
tion of measurements again.

13 Technical data

Base station
Batteries
Radio controlled signal
Maximum number of sensors 3
Temperature unit
Humidity measuring range
Humidity resolution
Temperature measuring
range
Barometric pressure unit
Time format
Dimensions (WxHxD)
Remote sensor
14 / 88
2x AA, 1.5 V
DCF
°C/°F
20% to 90%
1%
-5°C to 50°C (23°F to 122°F)
540 hPa to 1100 hPa /
15.95 to 32.49 inHg
12 or 24 hours
100 x 161 x 21.5 mm