Equalizer Presettings (Presets); External Audio Sources - Blaupunkt Daytona MP28 Mode D'emploi Et De Montage

Sound

Equalizer presettings (presets)

This device features an equaliser in which
the settings for "FLAT" (linear) and the mu-
sic genres "CLASSICS", "POP M" and "ROCK
M" are already programmed.
To select an equaliser setting,
u press the AUD button : repeatedly
until "FLAT", "CLASSICS", "POP M",
"ROCK M" or "DSP OFF" appears on the
display.
Turn the volume control 5 to select
u
one of the settings or select "DSP OFF"
to switch off the equaliser.
When you have fi nished making your chang-
es,
u
wait 5 seconds.
The settings are saved.
The respective setting appears on the dis-
play.
Note:
Without equaliser presets, you can
adjust the bass and treble from -10
to +10.
If you change the treble and/or bass
while an equalizer presetting (POP M,
ROCK M, CLASSICS, FLAT) is selected,
the equaliser switches off automatical-
ly (DSP OFF).

External audio sources

External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device via
the AUX input.
Notes:
• To connect an external audio source
via the rear or front AUX input (de-
pending on the model), you need a
cable with cinch plugs (rear AUX in-
put) or a 3.5-mm jack plug (front AUX
input).
• The AUX input can be selected with
the SRC button 4. "AUX" appears
on the display.
External audio sources
23