Arrangement - Storage - Eurocave CC064V3 Mode D'emploi

6 - A
Your cigar humidor EuroCave has been designed to evolve. Depending on the model, it can be adapted to your requirements and be modified in
terms of storage.
The EuroCave cigar cellars include two types of storage space, specially designed to accommodate cigar
boxes
Your EuroCave humidor has been designed to store a maximum number
of cigars in total safety. We recommend that you abide by the following
few suggestions in order that the maximum storage capacity can be
obtained.
Distribute your cigar boxes homogenously, taking care to leave space for
the air to circulate.
Also distribute the density of the load homogenously throughout your
humidor (avoid storing everything at the top or everything at the
bottom of the humidor).
If you have sliding shelves, for easy day to day access it is a good idea to
place them in the upper part of your humidor.
In addition, place a small amount of each type of cigar that you have in
the compartmentalised service tray, and store the remaining cigars in
their boxes. Then all you have to do is top them up as required.
Change position of a sliding shelf
Fully unload the sliding shelf.
Then lift out the sliding tray by sliding it forwards whilst at the same time lifting it from the front.
Find the runner guides on the left and right and remove.
Reinstall them in the new position (see diagram below).
A. Setting up the rear part of the guide
Wall
Wall
Guide
C. Then replace the sliding shelf
Sliding shelf
Guide
20
EN
RRANGEMENT
Guide
-
STORAGE
B. Setting up the front part of the guide
Guide
Sliding shelf + presentation tray - ref. APC
Sliding drawer - ref. ATC
Guide
Wall
Wall