Product Information Center (Pic); Removal From Service, Demounting, Disassembly; Storage; Disposal - TE Connectivity AT-SC MK II Mode D'emploi

1-528050-0
12.2

Product Information Center (PIC)

For questions to the different applications the technical product support will be pleased to assist you:
Homepage: http://www.te.com/support-center
Phone: +49(0)6151-607-1999
13

Removal from Service, Demounting, Disassembly,

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply. The machine
has to stand still before changing the adapter or the dies.
CAUTION!
 The pneumatic Parallel Crimp Machine AT-SC MK II is only allowed to get out of
operation with mounted adapter and die set.
 Wear suitable safety shoes when transporting and disassembling the machine.
 When working with the pneumatic Parallel Crimp Machine AT-SC MK II, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the mechanism.
 Work with caution.
14

Storage

Store the machine in the original box at room temperature.
15

Disposal

For the disposal of the pneumatic Parallel Crimp Machine AT-SC MK II, send it back to TE.
Page 58 / 94
412-94233 REV. D1