Commissioning; Connecting To Compressed Air Supply - TE Connectivity AT-SC MK II Mode D'emploi

1-528050-0
INFORMATION:
 To reduce production noise or vibration, the machine can be placed on an
insulating rubber mat.
 To ensure fatigue-proof use, the user has to take a working position, where the
machine is at the right height and the foot pedal is accessible. The double foot
pedal has to be installed in a stable position. The position of the double foot pedal
should be chosen in that way, that free access will be possible.
8

Commissioning

8.1

Connecting to Compressed Air Supply

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply.
CAUTION!
 Every machine operator, who is working with the machine, must read and
understand the operating instruction. During the work on or with the machine, the
operator has to follow the guidelines of the operating instruction.
 The crimp machine is only allowed to be used with mounted dies and die adapter.
 The pneumatic Parallel Crimp Machine AT-SC MK II may only be set up and
operated in perfect technical condition, observing all the safety regulations and
considering any possible dangers.
 Assure free access to the operating elements of the machine, especially the foot
pedal and the release button. In the case of imminent danger immediately press the
release button. The release button must be within the direct reach of the operator. It
must not be covered.
 When working with the pneumatic Parallel Crimp Machine AT-SC MK II, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the mechanism.
 Work with caution.
 In cases of a machine malfunction, production must be stopped and the
malfunction must be fixed before continuing work with the machine.
 Only one person is allowed to work on or with the machine at a time.
 Only trained personal are allowed to work on or with the machine.
 It is only allowed to work with the specified crimping force.
Page 47 / 94
412-94233 REV. D1