Installing The Mac Settings Panel - Tascam iXR Mode D'emploi

5. When the Setup Wizard screen appears, click the
"Next" button.
6. Read the contents of the License Agreement, and
select "I accept the agreement" if you agree to the
terms. Then, click the "Next" button.
7. Next, click the "Install" button to start installation.
8. A Windows security screen will appear twice.
Click the "Install" button to proceed with instal-
lation.
9. The following screen appears when installation
has completed.
Click the "Finish" button.
8
TASCAM iXR
NOTE
After installing the driver, the device driver will
be installed the first time the unit is connected
by USB.
At this time, Windows will automatically search
Windows Update, and it may take some time to
recognize the unit connection.
If the unit is still not recognized after some
time, open the software installation screen
from the message area at the bottom right of
the computer display, and click "Skip Obtaining
Drivers From Windows Update" to cancel the
search.

Installing the Mac Settings Panel

NOTE
• Install the Settings Panel on the computer before
connecting the unit to it with the USB cable.
• Depending on the Gatekeeper setting, a warning
message might appear during installation. For
information about Gatekeeper, see "Note about
Gatekeeper" in "3–Installation" of the Reference
Manual.
8 Settings Panel installation procedures
1. Download the software for the operating system
you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to
be used with the unit.
2. Double-click "iXR_Installer_XXX.dmg" (XXX is the
version number), which is the saved disk image
file for the Mac Settings Panel, and double-click
"iXR_Installer.pkg" inside the folder that opens.
NOTE
Depending on the computer's settings, the
downloaded zip file might not have opened
automatically. In this case, open the zip file first
and then double-click the disk image file.
3. When the installer starts, click the "Continue"
button.