Grillo CL62 Manuel D'utilisation page 13

PROCEDURE
Engine oil
Air filter
Spark plug
P.T.O belt
Check that:
-engine intake grid is clean
-hydraulic engine cooling fins are clean
Check that blades are well-sharpened and
well-fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
CAUSE
– Carburation problems
– Deposits or dirty residues in fuel
– ignition system does not work properly
CL62-CL62M/ Translation of the original instructions
MAINTENANCE SUMMARY TABLE
check the level
change
check
replace
check/adjust
replace
check tension
replace
TROUBLE-SHOOTING
Difficult starting or irregular running of engine
AT AFTER 5 EVERY 50
EACH HOURS HOURS
USE
●
●
●
●
●
●
●
PROBLEM
REMEDY
– Clean or change the air filter
– Adjust the carburettor (follow engine manual
instructions)
– Empty the tank and use fresh petrol
– Check and change the petrol filter if necessary
– Check that the vent hole on the fuel tap is not
clogged
– check the fixing of the spark plug hood
– check that the electrodes are clean and that
they are at proper distance from each other.
11
EVERY
100
HOURS
●
●
●
●
●
EVERY
200
HOURS
‫٭‬
●
‫٭‬