Berbel BKH 80 ST Manuel D'utilisation page 107

Cleaning
Upper and lower sections
The lower section is inserted in the lower front panel.
☞ Fold the lower front panel down.
☞ Lift the lower section out at the rear edge.
☞ Take hold of the lower section at the sides to remove it.
☞ Clean the upper section with a soft, moist cloth.
☞ Clean the lower section with a soft, moist cloth or in a
dishwasher.
☞ Dry the upper and lower sections with a soft cloth.
☞ Re-attach the lower section.
D "3.4.8 Insert inside parts" (page 102).
6003417_a – 26.09.2017
Capillar Trap
The Capillar Traps are inserted and held in place in the device
by magnets.
☞ Grasp the Capillar Traps on the sides with both hands.
☞ Pull the Capillar Traps out.
☞ Clean the Capillar Traps, e.g. in a dishwasher.
☞ Clean the surfaces and edges on the mounting slot for
the Capillar Traps with a soft, damp cloth.
☞ Make sure that the Capillar Traps are completely dry.
☞ Insert the Capillar Traps again.
D "3.4.8 Insert inside parts" (page 102).
107