Insert Inside Parts - Berbel BKH 80 ST Manuel D'utilisation

Installation
3.4.8

Insert inside parts

After the installation, the parts lying inside should be re-fitted.
☞ Insert the Capillar Traps into the mounting slot with both
hands.
☞ Slide the Capillar Traps in up to the stop. Magnets hold
the Capillar Traps in the device.
☞ Insert the lower section flush in the flap of the front cover.
☞ Close the front panel.
102
D ATTENTION!
Danger of property damage through improper handling!
When inserting the filter in the device, the cables may
become damaged.
☞ Carefully insert the filter in the device.
☞ Make sure that the filter is not placed on a cable.
☞ Insert the filer again.
If the recirculated air filter permalyt is used:
☞ Plug the connection cable back in.
☞ Fit the cover.
☞ Screw the cover on.
The device is ready for operation.
6003417_a – 26.09.2017