Switching Off The Alarm; Cooking Timer Function; Calling Up And Starting Preset Timer Times - Medion LIFE E66567 Notice D'utilisation

13.1.1. Interrupting/ending an active alarm
When the set alarm time is reached, the radio switches on or acoustic signals sound,
depending on the selected option.
 During an active alarm, press any button on the left side of the display or any
button on the remote control to stop the alarm until the next programmed time.
 Press the controller during an active alarm to repeat the alarm tone after 9
minutes (SNOOZE).

13.1.2. Switching off the alarm

 Switch the radio to standby mode.
 Press the ALARM button. ALARM 1 is shown on the display.
 Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to switch between ALARM 1 and ALARM 2, then press the controller
or the
 Turn the controller or press on of the VOL+ / VOL buttons on the remote
control until OFF is shown on the display.
 Press the controller or the
permanently deactivate the selected alarm.
The corresponding alarm symbol is no longer shown on the display.

14. Cooking timer function

The device has a cooking timer function. Acoustic signals will sound shortly before
and after a set timer time (maximum of 23 hours, 59 minutes).
You can either select one of the 6 preset timer times or adjust the stored timer times
individually to your needs.

14.1. Calling up and starting preset timer times

 Press the TIMER button once or several times to switch between the following
preset timer times (T1–T6):
T1 = 5 minutes
•
T2 = 10 minutes
•
T3 = 15 minutes
•
T4 = 30 minutes
•
T5 = 45 minutes
•
T6 = 60 minutes
•
 Press the controller or the
displayed timer memory slot. The indicator for the timer time flashes on the
display.
 To start a cooking timer with the preset timer time, press the controller several
times or the
mode (radio frequency/BT/AUX) is shown again on the display.
The timer starts and
68
button on the remote control to confirm your selection.
button on the remote control until the current operating
is shown on the display.
button on the remote control to
button on the remote control to select the