Telephone Calls; Connecting Devices Using The Aux Connection; Basic Settings - Medion LIFE E66567 Notice D'utilisation

10.6.3. Telephone calls

When a call is received, the call LED flashes green.
 Press the controller or the
incoming call.
The call LED lights up green and the call is accepted. During the call, music playback
is muted.
 When there is an incoming call, press and hold the controller
button on the remote control to reject the call.
 During the call, press the
control to end the call.
The call LED goes out when the call has ended.

10.1. Connecting devices using the AUX connection

You will need an audio cable with a 3.5 mm jack (not supplied) to connect an
external playback device (e.g. MP3 player).
 Set the playback device to a medium volume level and then switch it off.
 Plug the 3.5 mm jack into the headphone connection or LINE OUT connection
on the playback device.
 Plug the other end of the cable into the AUX port on your under cabinet radio.
 Press the FUNC/USER button or the FUNC button on the remote control
until AUX is shown on the display.
several times
 Switch on the playback device and start playback from there.

11. Basic settings

The radio must be in standby mode to carry out the different settings.
 Press and hold the SET/MEM./AMS button or press the SET button on the
remote control to open the settings menu.
 Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to select one of the following settings options:
• Time Set (set time)
• Date Set (set date)
• CT Update (automatic time synchronisation on/off )
• DT (dimmer timer function on/off )
• 12H/24H (time format)
If no button is activated in the settings menu within 10 seconds, the
menu is automatically closed. Settings made up to this point are saved.
You must go through all the menu settings again to make any further
changes.
64
button on the remote control
controller or the
to accept an
or the
button on the remote