Pressing the button or the -/+ controller several times stores the setting
and the alarm is active. If you have previously selected the ALARM OFF set-
ting, the settings are not stored.
11.2. Deactivating the alarm
Press the ALARM button and select the desired alarm (ALARM 1 or 2) by
pressing the button several times.
Press and hold the ALARM button until ALARM OFF appears on the display.
11.3. Stopping the alarm / activating the snooze
function
When the alarm sounds, you can:
Press the ALARM button to stop the alarm or press the controller to activate
the snooze function. After approx. 9 minutes, the alarm sounds again. This can
be repeated up to three times.
If the alarm is sounded using the radio, you can switch it off by pressing
snooze function is not possible.
11.4. Timer
You can set a timer to start in up to 300 minutes.
Press the TIMER button. The timer menu appears on the display to set the tim-
er time.
Select the duration until the timer start by turning the -/+ controller or by
pressing the / buttons.
Press the TIMER button to confirm.
Once the set period of time has expired, the alarm will start to sound with the vol-
ume increasing steadily.
Press the TIMER button to stop the alarm.
If you wish to cancel the timer, proceed as follows:
Press the TIMER button. The current timer setting appears on the display.
Turn the controller to select the duration 000.
Press the TIMER button again. The timer menu is then closed.
DE
FR
NL
IT
ES
EN
. The
165