13.1. Setting the alarm time
Switch the radio to standby mode.
Press the ALARM button. ALARM 1 is shown on the display.
Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to switch between ALARM 1 and ALARM 2, then press the controller
or the
Turn the controller or press one of the VOL+ / VOLbuttons on the remote
control until ON is shown on the display and press the controller or the
button on the remote control again to set the alarm time. The hour
display flashes.
Use the controller or the VOL+ / VOL buttons on the remote control to set the
desired hour.
Press the controller or the
the minutes display and set the desired minutes using the controller or the
VOL+ / VOL buttons on the remote control.
Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to select when the alarm should sound.
You can select one of the following options:
1-7: Every day of the week
•
1-5: Monday to Friday
•
6-7: At the weekend (Saturdays and Sundays)
•
ONCE (one-off alarm per week that you can programme using the controller: 1
•
> 2 > 3 > 4 > 5 > 6 > 7)
Press the controller or the
setting.
Turn the controller or press one of the VOL+ / VOL buttons on the remote
control to select the desired alarm type.
You can select one of the following options:
TUNER: Last radio frequency set
•
BUZZ: Acoustic signal
•
Press the controller or the
alarm type.
Now use the controller or the VOL+ / VOL buttons on the remote control to
select the volume (V03–V30) the alarm should sound and then confirm your
selection by pressing the controller or the
control.
The programmed alarm is now active and AL1/AL2 is shown on the display.
The radio alarm type has an alarm duration of 60 minutes, acoustic
signals are played for 10 minutes.
button on the remote control to select the respective alarm.
button on the remote control to switch to
button on the remote control to save your
button on the remote control to save the
button on the remote
DE
EN
FR
NL
IT
ES
67