Progress PAI6105E Notice D'utilisation page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
(
comes on in the display).
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
Power function
The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical Infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on. To deactivate, change the
heat setting.
comes on
4
5
6
7
8
Power management
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for one
cooking zone in the pair. The power in the
second cooking zone automatically decrea-
ses. The heat setting display for the re-
duced zone changes between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch
or
00
99
(
-
9
of the cooking zone starts to flash slow,
the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
vate the Timer. The remaining time
counts back to
cooking zone goes out.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
,
The display shows the remaining time.
of the timer to set the time
minutes). When the indicator
and touch
00
. The indicator of the
. The indicator of
progress 21
to deacti-

Publicité

Table des Matières
loading

Table des Matières