Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

20 progress
9
/
10
Heat setting displays
Display
-
+ digit
Residual heat indicator
Warning!
The risk of burns from
residual heat!

DAILY USE

Activation and deactivation
Touch
for 1 second to activate or deac-
tivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, wait for the
cooking zone to cool down.
• You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
Sensor field
The cooking zone is deactivated.
The cooking zone operates.
The
function operates.
The Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on the cooking
zone.
The Automatic Switch Off function operates.
To increase or decrease the time.
To set a cooking zone.
Description
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is hot
from the heat of the cookware.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
,
-
).
-
— 5 hours
— 4 hours
-
— 1.5 hours
The heat setting
Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting. The display
shows the heat setting.
Function
— 6 hours

Publicité

Table des Matières
loading

Table des Matières