Télécharger Imprimer la page

Mesto STABILUS 3541G Mode D'emploi page 13

Masquer les pouces Voir aussi pour STABILUS 3541G:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
IRL
Wear suitable protective clothing, goggles and respiratory protection when
working with hazardous substances.
Never spray on people, animals, electrical devices and lines, into the wind,
or into bodies of water.
Avoid ignition sources in the environment.
Do not leave the device in the sun. Ensure that the device is not heated
beyond the maximum operating temperature (→ Table 1). Protect the de-
vice from frost and ammonia.
Never blow through the nozzles or valves with your mouth.
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice,
on slopes and on uneven terrain.
Repairs and modifications to the tank are not permitted.
Use only MESTO spare parts and accessories.
We cannot assume any liability resulting from the use of third-party parts.
When pumping, always observe the pressure gauge to ensure that the
recommended spraying pressure is maintained (→ Table 1 below).
After use and before maintenance work, depressurize the device.
Transport the devices in such a way that they are protected against
damage and overturning.
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Backpack spraying device with spray line [1] and carrying strap [3], spray lance [2],
Instructions for Use [4], seal set [5]. (Fig. 1)
Technical data
Type of device
Max. filling amount
Max. spraying pressure
Max. operating temp¬erature
Weight when empty / Gross weight max.
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Table 1
AUS
USA
13
NZ
CDN
STABILUS 3541G
18 l
6 bar
40 °C
5.0 / 23.0 kg
Stainless steel
Back
0,13 l
2 l/min at 2 bar
IND

Publicité

loading