Sennheiser EM 3731 Notice D'emploi page 90

Specifications
Overall device
Ambient temperature
Relative humidity
Power supply
Current consumption
Power consumption
Mains connector
Dimensions W x D x H [mm]
Weight
Booster supply
Ethernet
Digital output
Word clock connection
Accepted sampling rates
Word clock input impedance
Word clock output impedance
In compliance with
Type approval
42
–10 °C to +55 °C
max. 85 %
100–240 V AC, 50/60 Hz
max. 0.4 A
with receiver switched off: max. 20 W (50 VA)
with receiver switched off, booster supply voltage switched on: max. 9.5 W
with receiver and booster supply voltage switched off: max. 4 W
3-pin, protection class I, as per IEC/EN 60320-1
436 x 215 x 44 (without rack mount "ears")
approx. 4080 g (incl. rack mount "ears")
approx. 3600 g (without rack mount "ears")
12 V DC via antenna socket
max. 200 mA each, short-circuit proof, switchable
IEEE 802.3-2002, shielded RJ 45 socket with optional locking facility
AES3-2003, XLR-3, 44.1, 48, 88.2 or 96 kHz SR, 24 bits,
externally synchronizable
2 BNC sockets (75 Ω), daisy chain output
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
75 Ω, transformer balanced, AC-coupled
input voltage range 200 mV ... 5 Vpp
max. input voltage 15 V (DC + AC)
75 Ω, transformer balanced, AC-coupled
output voltage 2.5 V± 250 mV at 75 Ω source impedance
EMC EN 301489-1/-9
Radio EN 300422-1/-2
Safety EN 60065
47 CFR 15 subpart B
Industry Canada RSS 210, IC: 2099A-EM 373x