Overview Of The Display; Brightness Control - Sennheiser EM 3731 Notice D'emploi

Overview of the display

8
Overview of the display
³ · » ¿ ²
RF % DEV
A B
790.800
300
PEAK
100
100
30 03.03
50
10
μV 10
´
Reception display
³
RF level display "RF" for antenna A
·
Diversity display (antenna A or antenna B active)
»
RF level display "RF" for antenna B
¿
Audio level display "Dev"
´
Display of the squelch threshold
For additional information see pages 9 and 10.
Status display
²
Frequency display
¶
"MHz" – appears when the frequency is displayed
º
6-step transmitter battery status display
¾
Command display (status display of the audio outputs AF and COM)
(EM 3732 Command twin receiver only)
µ
Display for the current frequency bank and channel or the name
For additional information see pages 10 and 11.

Brightness control

The display has an automatic brightness control. The brightness is dimmed
after the last key stroke. With each new button press, the display lights up
with full brightness.
Triggers for dimming
No service
Squelch not reached
¶ º
M
H
z
BANK
AF COM
CH
µ ¾
after Behavior of the display
60 s Display is slightly dimmed
20 min Display turned off