Sennheiser EM 3731 Notice D'emploi page 63

Mounting the antennas to the front of the rack
When rack mounting the receiver, you require the GA 3030 AM antenna
mount (available as an accessory) to mount the antenna connections to
the front of the rack. The GA 3030 AM antenna mount consists of:
2 BNC extension cables (screw-in BNC socket
Z
2 antenna holders
4 screws
Y
2 washers
X
2 nuts
Unsecure the rack mount "ears"
Guide the BNC cables through the holes in the rack mount "ears" as
shown in the diagram on the left.
Screw the antenna holders
X W
washers and nuts
Secure the antenna holders
of the supplied screws respectively.
Connect the two BNC connectors
rear of the receiver.
Slide the receiver into the 19'' rack.
Resecure the rack mount "ears"
\
Connect the antennas
Align the antennas upwards in a V-shape.
Putting the receiver into operation
W
to BNC connector
1
from the rack.
Z Y
to the BNC sockets
.
Z
to the handles of the receiver using two
[
to the BNC sockets
1
to the rack.
W
to the BNC sockets .
[
)
using the supplied
O R
and at the
15