Channel list
Scan new
Scan reset
Freq. occupied
1.
790.800
MHz
Channel list
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
save
790.800
DEV
M
H
z
sync
03.03
BANK
AF
COM
esc
CH
Freq. occupied
1.
790.800
MHz
Press the
save
The selected configuration is stored. The display changes to the
selection mode of the operating menu.
Changing to the extended menu
More
Via the "More" menu, you can change to the extended menu with the
submenus "Scan", "Display", "IP-Addr", "MAC", "Standby" and "Reset".
Scanning the frequency banks for interference-free channels
Scan
Via the "Scan" menu, you can scan all frequency banks for free channels.
Change to the setting mode of the "Scan" menu.
The following menu items appear:
– "Channel list"
displays the number of free channels for each frequency bank from
the last scan.
– "Scan new"
scans all frequency banks and displays the number of free channels
for each frequency bank.
– "Scan reset"
B.Ch
releases channels that were occupied or subject to interference
during the last scan (these channels a marked with a warning
triangle and the text
Displaying a list of all free channels
Via the
"Channel
then select a suitable frequency bank and a channel.
Turn the jog dial
Press the jog dial
A table displays the number of free channels for each frequency bank.
Turn the jog dial
of free channels.
Press the
save
The selected frequency bank is automatically called up in the "B.Ch"
menu.
digital audio
processing
Select a channel from this frequency bank (see "Selecting a frequency
sync
bank and a channel" on page 28).
Note:
B.Ch
After the scan, the channels that are occupied or subject to interference
are marked with a warning triangle and the text
"Tune" menu.
8
button
.
"Freq.
occupied" in the "Tune" menu).
list" menu, you can display the last scan result. You can
7
until the arrow points to
7
.
7
to select a frequency bank with a sufficient number
8
button
.
The operating menu
"Channel
list".
"Freq.
occupied" in the
33