Maintenance Table; Problem Identification - Stiga MP2 504 Série Manuel D'utilisation

• Any ancillary expenses related to the enforcement
of the warranty, such as costs incurred to travel to
the user's location, transfer of the machine to the
Dealer, rental of replacement equipment or calling of
independent enterprises to perform maintenance work.
The warranties covering thermal engines, except for
"ST" engines. These are covered by the warranties
provided by the engine manufacturers themselves,
with all terms and conditions indicated by the same.

13. MAINTENANCE TABLE

MACHINE
Check all fasteners
Safety checks/check controls
Check the rear discharge / side discharge guards.
Check the grass catcher, side discharge chute.
Check the cutting means
General cleaning and inspection
Checking for any damage to the machine. If necessary,
contact the authorised service centre.
Adjusting the converter cable
Replacing the cutting-means
ENGINE
Checking/topping up fuel level
Check/top-up engine oil
Air filter cleaning and check
Spark plug points cleaning and check
Replace the spark plug
Battery power reserve
* Check the engine manual.
** Operation to be performed at the first signs of any malfunction
*** The operation must be carried out by your Dealer or a specialized Service Centre

14. PROBLEM IDENTIFICATION

If problems persist after having performed the above operations, contact your dealer.
PROBLEM
Intervention
PROBABLE CAUSE
The user is protected by his or her own national legislation.
The user's rights under the national laws or his or her own
country are not in any way restricted by this warranty.
Before each use
Before each use
Before each use
Before each use
Before each use
After each use
After each use
Before each use
Before each use
EN - 12
Frequency
**
-
*
*
*
*
SOLUTION
Notes
par. 7.5
par. 6.2
par. 6.2.1
par. 6.2.1
par. 6.2.1
par. 7.4
-
par. 7.7
par. 8.1 ***
par. 6.1.1 / 7.2 *
par. 6.1.1 / 7.3 *
*
*
*
par. 7.6 *