Important; Description Of Controls; Main Switch - emmeti EC 0510 Manuel D'installation Et D'utilisation

I.1.1 INFORMATION ON RESIDUAL RISKS AND
IRREMOVABLE HAZARDS

IMPORTANT!

Pay the utmost attention to the signs and symbols
located on the appliance.
If any risks remain in spite of the provisions adopted, or if there are any
potential or hidden risks, these are indicated by adhesive labels
attached to the machine in compliance with standard "ISO 3864".
I ON
Indicates the presence of live components.
Indicates the presence of moving parts (belts,
fans).
Indicates the presence of hot surfaces
(refrigeration circuit, compressor heads).
Indicates the presence of sharp edges in
correspondence to the finned coils.
I.4

DESCRIPTION OF CONTROLS

The controls consist of the main switch, the automatic switches and the
user interface panel located on the appliance.
I.4.1

MAIN SWITCH

Manually controlled type «b» mains power supply disconnecting switch
(ref. EN 60204-1 § 5.3.2).
I.4.2 AUTOMATIC SWITCHES
• Automatic switch for compressor protection
This switch allows the supply or isolation of the compressor's main
power circuit.
31
SECTION I: USER