Starting Up; Program Variants - Gram KPS 60 Mode D'emploi

The switch on the panel screen does not cut off power to all components in the
appliance. It is therefore highly dangerous to switch off only at the panel screen if
electrical parts are exposed. Therefore, further isolate the cabinet by pulling out the
plug.
To ensure that no water penetrates electrical parts, ensure that while cleaning no
water is sprayed directly onto the panel screen and refrigerating system of the
appliance.

Starting up

Hidden key
Time setting
Chilling temperature with probe
Storage temperature
Press the main switch
The figures now displayed give the actual temperature in the cabinet and at the
same time confirm that power is on.
The cabinet is now ready for programming and/or starting up. See section on
programming and program sequence.
NOTE:
Servicing
Make sure the appliance is switched off at the socket before service is performed on
electrical parts. It is not sufficient to switch off the cabinet by the ON/OFF key as
there will still be voltage to some electrical parts of the cabinet.

Program variants

The cabinet offers the following program possibilities:
1: Storage program.
2: Time-controlled chilling.
3: Temperature-controlled chilling with probe.
76-504-0656
to start.
Arrow key up
Arrow key down
Main switch
Alarm ON/OFF
17