Technical Specifications - Parkside PTHSA 20-Li B3 Traduction Des Instructions D'origine

Taille-haies télescopique sans fil 20 v
Masquer les pouces Voir aussi pour PTHSA 20-Li B3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
Technical specifications
Rated voltage
Idle stroke speed
Working angle
Cutting length
Tooth spacing
Weight (ready for use)
Battery PAP 20 B3*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 C3*
INPUT
Rated voltage
Rated power consumption 120 W
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level
of the power tool is typically:
Sound pressure level
Uncertainty
Sound power level
Guaranteed sound
power level
Uncertainty
PTHSA 20-Li B3
20 V
(DC)
1150 rpm
–60° to +90°
410 mm
15 mm
approx. 3.7 kg
LITHIUM ION
20 V
(DC)
4 Ah/80 Wh
10
230–240 V ∼, 50 Hz
(AC)
T3.15A
3.15 A
21.5 V
(DC)
4.5 A
approx. 60 min
II /
(double insulation)
L
= 71.7 dB (A)
PA
K =
3
dB
L
= 84 dB (A)
WA
L
= 88 dB (A)
WA
K = 2.05 dB
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value
Uncertainty
Wear ear muffs!
NOTE
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
a
< 2.5 m/s
2
h
K = 1.5 m/s
2
GB │ IE
 3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

373422 2104

Table des Matières