Operating Instructions - Faro edi Mode D'emploi

OPERATING INSTRUCTIONS

Mod. S/TS "edi" Dental Lamp
Use of the lamp is limited to the following operations.
•
Turning On
⇒
Mechanical. Use Switch "A"
ON
⇒
By Sensor. Place hand within not more than 3 cm distance of Sensor "B"(fig 2)
ON / OFF
•
Adjusting Light Intensity
⇒
Use Wheel "C" to adjust light intensity (fig 3).
Assembling forked lower handle (on request)
To insert forked lower handle proceed as follows:
•
Remove front screen (fig.4 pag.20)
•
Remove plugs by acting on points "M" (fig.10)
•
Insert forked lower handle by pressing on points "L" (fig.9).
Release it when fitted in the holes.
PLUGS OR FORKED LOWER HANDLE SHOULD BE ALWAYS
FITTED IN THE HEAD WHILE LAMP IS WORKING
FOR FIXED HANDLES USE DISPOSAL COVER
(fig.1)
OFF
19