Publicité
Les langues disponibles
Les langues disponibles
1.11. The Rear Panel
1
Handle: pull up the handle vertically for easy carrying;
press it down if you do not need the handle.
2
EXT TRIG: External Trigger signal input terminal.
3
Pass/Fail or Trig Out output: via this interface the
oscilloscope can output a signal that can reflect the
current capture rate of the instrument at each trigger
or a Pass/Fail pulse.
4
LAN Interface: the instrument can be connected to
network via this interface to perform remote control.
English
5
USB device: PictBridge printer or PC can be connected via
this interface to print the current interface of the oscilloscope
or control the instrument through PC software.
6
Lock hole: the instrument can be locked in a fixed location
using a security lock via the lock hole.
7
AC Power socket: the standard power supply for the
instrument is 100~240V 45~440Hz. Please use the power
cord provided as accessories to connect the instrument to
AC power.
8
Fuse: if a new fuse is required, please use the specified
fuse (250V, T1.25A).
26
Publicité
