Ront Panel Description; Ack Panel Description - Metrix IX 3131B Notice De Fonctionnement

2.1. Front panel description
1
1. POWER ON / OFF Power switch
2. LCD
3. RS 232
4. HOLD (REC)
D / Q / θ θ θ θ
5.
6. FREQ
7. RANGE (AUTO)
8. L / C / R (P-S)
9. TOL
10. REL (CAL)
11.
12.
2.3. Back panel description
RS 232 interface
1.
Socket
2.
Voltage selector and fuse holder
3.
IX 3131B
2 3
11
Display
RS 232 Function selection button
Press this button to hold data. Press this button > 1 sec. to enter
Static Recording for Maximum, Minimum and Average reading.
Press this button to select Dissipation factor, Quality factor and
Phase angle displays.
Press this button to select test frequency.
Press this button to select measuring range.
Press this button to select Inductance, Capacitance and Resistance
measurements.
Press this button > 1 sec. to toggle parallel and series mode.
Tolerance mode selection button
Relative mode and calibration selection button
Protective ground to be connected to prevent from noise influence
Input terminals
1
4 5 6
12
2
7 8 9
3
10
II - 29