Publicité
Les langues disponibles
Les langues disponibles
9.
Sample Rate/Memory Depth
Display the current sample rate and memory depth
of the oscilloscope. Use horizontal SCALE knob to
modify the parameter.
10. Trigger Setting
Trigger Source
currently selected. Different labels are displayed
when different trigger source are selected and the
colour of the trigger parameter area will change
accordingly.
Coupling Mode
(DC/AC/LF Reject/HF Reject) of the current trigger
source.
Trigger Level
value of the current waveform. Press down the knob
to reset the parameter to zero.
Display the currently selected trigger type and
trigger condition setting. Different labels are
displayed when different trigger types are selected.
For example:
edge trigger.
11. Channel Setting
Probe Attenuation Factor
selected probe attenuation factor.
All factors are : 0,1X/0,2X/0,5X/2X/10X/20X/ 50X/
100X/200X/500X/1000X/2000X/5000X/10000X.
Display the trigger source
Display coupling mode
Display the trigger level
means triggered on Slop side in
Display currently
English
Channel Coupling
coupling mode of the current channel.
All modes are: DC/AC/GND.
Voltage Scale
value of each grid on the vertical axis of the screen.
Use POSITION knob to modify the parameter.
BW Limit B If the current "BW Limit" is "On", then
the mark B displays. When the vertical scale is
2mV/div, the "BW Limit" turns on automatically.
Impedance 1MΩ Display currently selected
impedance (1MΩ/50Ω) of the channel.
12. Trigger Level Position
Display position of the current channel trigger level.
Press down the knob to reset the level to vertical
centre of the screen.
13. Menu Display menus of the currently selected
function module. Press any menu softkey to perform
corresponding setting.
33
Display the selected
Represent the voltage
Publicité
