Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Interface
1.
METRIX Trademark
2.
Channel Label/Waveform
Different channels are marked by different colours
and the colour of the waveform complies with the
colour of the channel.
3.
Working state
Available states include: Arm、Ready、Trig'd、
StopAuto.
English
4.
Horizontal Time Base
Represent the time of each grid on the horizontal
axis of the screen. You could revolve HORIZONTAL
SCALE Knob to modify the parameter which is
variable from 1ns ~ 50s.
5.
Trigger Position
Use horizontal Position knob to modify the
parameter. Turn clockwise or counter-clockwise to
make the waveform move right or left, which will
respectively cause the Delay parameter to decrease
or increase. Press down the knob to automatically
reset the parameter to zero as well as make the
waveform return to horizontal centre of the screen.
6.
Trigger position
Display the trigger position of the waveform on the
screen.
7.
USB Device Interface Mark
Indicate the current set of USB Device Interface. If the
icon displays
if the icon displays
8.
Frequency Counter
Display the firmware frequency of current waveform.
32
the interface is set to USBTMC ;
the interface is set to Printer.
Publicité
Table des Matières
